Mercedes-Benz GLE 2022 Operator's Manual page 301

%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: if the Î drive program was the
last one active, and all requirements for the drive
program are fulfilled, this will be automatically
selected the next time the vehicle is started. If
another drive program was active, then the n
drive program is set automatically.
Function off: the next time the vehicle is started
the A drive program is set automatically.
Displaying vehicle data
Multimedia system:
© Info
4 5
Select Vehicle.
#
The vehicle data is displayed.
Displaying engine data
Multimedia system:
© Info
4 5
Select Engine.
#
The engine data is displayed.
%
The actual maximum values that can be ach-
ieved for engine output and engine torque
may deviate from the certified values within
the country-specific guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specific guidelines).
Variables that can influence this are, for
example:
Sea level
R
Fuel quality
R
Outside temperature
R
Operating temperature of the engine
R
Adjust your driving style accordingly.
The p warning lamp in the driver's display
is on until the engine has reached operating
temperature.
F167 0009 02
Driving and parking 299
%
The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown in the media display may devi-
ate from the actual values.
%
The p warning lamp to show the power
output limitation after starting the vehicle is
not available in all vehicle models.
Calling up the fuel consumption indicator
Multimedia system:
© Info
4 5
Select Consumption.
#
The current and average fuel consumption will
be displayed.