Mercedes-Benz GLE 2022 Operator's Manual page 494

492 MBUX multimedia system
Near Field Communication (NFC)
▌Information on Near Field Communication
(NFC)
NFC enables short-range wireless data transfer or
connection of a mobile phone with the multimedia
system.
Further information can be found at: https://
www.mercedes-benz-mobile.com/
▌Switching near-field communication on or off
Multimedia system:
© Settings System
4 5 5
Internet and Bluetooth
5
Activate or deactivate NFC.
#
%
Further information on connecting a mobile
phone via the NFC interface (
Wi-Fi
▌Wi-Fi connection overview
You can use Wi-Fi to set up a connection to the
Internet or to external network devices.
%
The availability of the function is dependent
on the country.
Generally, two types of Wi-Fi connection are avail-
able:
Using the multimedia system as a Wi-Fi hot-
R
spot (
/
The vehicle's multimedia system serves as a
Wi-Fi hotspot for mobile communication devi-
ces, such as smartphones or tablet PCs, for
example.
Using a mobile communication device as a Wi-
R
Fi hotspot (tethering) (
An external Wi-Fi hotspot is accessed for the
Internet connection of the vehicle's multime-
dia system.
▌Switching Wi-Fi on or off
Multimedia system:
page 555).
/
©
4
Internet and Bluetooth
5
Select Wi-Fi.
#
The controller is to the right: Wi-Fi is switched
on.
page 492)
page 588)
/
Settings System
5 5
F167 0009 02
When Wi-Fi is switched on, you can connect the
multimedia system with external hotspots or make
it available as a hotspot for external devices.
When Wi-Fi is switched off, it is not possible to
establish a hotspot connection.
When Wi-Fi is switched off, no connection can be
established with the MBUX rear tablet.
% The availability of the function is dependent
on the country.
▌Using the multimedia system as a Wi-Fi hotspot
Requirements:
The device to be connected supports at least
R
one of the types of connection described.
The connection types shown depend on the
device to be connected. The function must be
supported by the multimedia system and by
the device to be connected. The type of con-
nection must be selected on the multimedia
system and on the device to be connected.
%
The data volume of the vehicle or an already
connected tethering device is used for the
data connection.