Mercedes-Benz GLE 2022 Operator's Manual page 32

30 Quick start and Tips
Moving the wiper arms into the replacement posi-
tion
Switch the vehicle on and then off again
#
immediately.
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
The wiper arms will move into the replacement
position.
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Observe the information about the mainte-
#
nance display.
Maintenance display
page 241).
/
Remove protective film
#
nance displays on the tips of the newly fitted
wiper blades.
When the colour of the maintenance displays
changes from black to yellow, replace the wiper
blades.
1 from the mainte-
F167 0009 02
%
The duration until the colour changes varies
depending on the usage conditions.
Checking the engine oil level using the driver's
display
Requirements
The engine has been warmed up.
R
The vehicle is parked on a level surface.
R
The engine is running at idle speed.
R
The bonnet is closed.
R
Determining the engine oil level can take up to
30 minutes with a normal driving style and even
longer with an active driving style.
Driver's display:
Service
4
The engine oil level is shown.
One of the following messages will appear on the
driver's display:
Engine oil level Measuring now...: the engine
R
oil level cannot be determined yet.