Mercedes-Benz GLE 2022 Operator's Manual page 36

Hide thumbs Also See for GLE 2022:
Table of Contents

Advertisement

34
Quick start and Tips
The risk of aquaplaning is increased on wet
roads, especially when the speed of the vehi-
cle is not adapted to suit the conditions.
Thus, you should regularly check the
#
tread depth and the condition of the
tread across the entire width of all tyres.
Minimum tread depth for:
Summer tyres: 3 mm
R
M+S tyres: 4 mm
R
For safety reasons, replace the tyres
#
before the legally-prescribed limit for the
minimum tread depth is reached.
Carry out the following checks on all wheels regu-
larly, at least once a month or as required, for
example, prior to a long journey or driving off-
road:
Check the tyre pressure (
/
R
Visually inspect wheels and tyres for damage.
R
Check the valve caps.
R
Visual check of the tyre tread depth and the
R
tyre contact surface across the entire width.
The minimum tread depth for summer tyres is
3 mm and for winter tyres 4 mm.
Removing the safety vest
page 657).
There are safety vest compartments in the door
compartments of all doors where safety vests can
be stored.
F167 0009 02
To remove: pull out the safety vest bag
#
the loop2.
Open the safety vest bag
1
#
safety vest.
Put back: Fold up the safety vest, roll it up and
#
stow it in the safety vest bag1.
Slide the safety vest
bag1
#
edge of the armrest into the warning vest
compartment. Make sure that the loop
hangs out to be easy to reach.
%
For a new safety vest, remove the packaging
film before sliding it into the safety vest com-
partment. Otherwise, it may cause uninten-
tional slipping out or make it difficult to
remove.
Observe the legal requirements in the individ-
ual countries.
1
by
and pull out the
along the lower
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents