Mercedes-Benz GLE 2022 Operator's Manual page 539

▌Switching the traffic information display on
Multimedia system:
© Navigation
4 5 5
Select View.
#
Traffic .
#
Traffic incidents
Activate and
#
traffic.
Traffic incidents, for example roadworks, local
area reports (e.g. fog) and warning messages,
are shown on the route.
Car-to-X-Communication
▌Car-to-X-Communication overview
The following requirements apply for the Car-to-X-
Communication service:
The vehicle is equipped with an MBUX multi-
R
media system with navigation function.
There is a subscription for the Live Traffic
R
Information service.
The Car-to-X-Communication service is activa-
R
ted in your Mercedes me user account.
% Car-to-X-Communication is available in selec-
ted countries.
Z
The communication module automatically estab-
lishes an Internet connection once the vehicle is
switched on. If there are any hazard warnings,
they will be provided shortly thereafter. Depend-
Free-flowing ing on the mobile phone connection, provision
takes place from within a second up to about a
minute.
Benefits of Car-to-X-Communication:
Dangers are automatically detected by the
R
vehicle or can be reported by the driver. These
are then sent to vehicles with Car-to-X-Com-
munication in the immediate vicinity.
If available, current details relating to hazard
R
spots near the vehicle's current position are
received.
This gives you sufficient time to adapt your
driving style to the traffic conditions.
The use of Car-to-X-Communication requires the
regular transmission of vehicle data to Mercedes-
Benz AG. The data is then immediately pseudony-
mised by Mercedes-Benz AG. The vehicle data is
deleted after an appropriate amount of time has
F167 0009 02
MBUX multimedia system 537
elapsed (several weeks) and is not stored perma-
nently.
%
Data which serves as identification is
replaced during the pseudonymisation proc-
ess. In this way, your identity is protected
against access by unauthorised third parties.
▌Displaying hazard warnings
Multimedia system:
© Navigation
4 5
If hazard warnings are available these can be
shown as symbols on the map. The display
depends on the settings for the
option.
Set the option via Z (
/
#
If the option is activated, all of the symbols are
shown.
If the option is deactivated, the symbols are
only shown when there is a hazard warning.
The following hazards may be shown on the map:
Accidents and breakdowns
R
Slippery roads, fog, crosswinds and heavy rain
R
Hazards reported manually
R
Traffic incidents
page 537).