Mercedes-Benz GLE 2022 Operator's Manual page 330

328 Driving and parking
Combo 1 vehicle socket Combo 2 vehicle socket
Press the centre rear section of socket flap
#
1 and swing the socket flap forwards and
open.
The % indicator lamp 3
display 4 light up white.
%
If socket flap 1 cannot be opened despite
the vehicle being unlocked, the charge socket
F167 0009 02
flap can be opened by emergency release
( page 335).
/
Press catch
#
cover 2.
%
Vehicles with a vehicle socket combo require
only connection
connector. Open only the upper part of socket
cover 2.
To charge at a mains socket, insert the mains
#
plug into the mains socket of the external
power source as far as it will go.
Insert the charging cable connector into vehi-
#
cle socket connection
wallbox/charging station is not equipped with
a charging cable, insert the plug of the vehi-
cle's charging cable into the wallbox/charging
station socket to the stop.
Make sure that the charging cable is not taut
when inserted.
and upper status
The # indicator lamp
display
high-voltage battery is charged, green.
7 to the right and fold up socket
6 for the charging cable
6 to the stop. If the
5 and lower status
4 flash orange and, as soon as the