Mercedes-Benz GLE 2022 Operator's Manual page 257

Switching the synchronisation function on/off via
the air conditioning menu
Multimedia system:
Climate menu First row of seats
4 5
The synchronisation function controls the climate
control centrally. The driver's settings for temper-
ature, airflow and air distribution are automatically
adopted for each climate zone.
Select SYNC (SYNC).
#
Demisting the windows
Windows misted up on the inside
Press the à button.
#
If the windows remain misted up: press
#
the ¬ button.
Windows misted up on the outside
Switch on the windscreen wipers.
#
Press the à button.
#
Switching air-recirculation mode on/off
Press the g button.
#
The interior air will be recirculated.
Air-recirculation mode automatically switches to
fresh air mode after a while.
%
If air-recirculation mode is switched on, the
windows may mist up more quickly. Switch on
air-recirculation mode only briefly.
Switches the residual heat on/off
Requirements:
the vehicle is parked.
R
It is possible to make use of the residual heat
from the engine to continue heating or ventilating
the front compartment of the vehicle for approx-
imately 30 minutes, depending on the tempera-
ture set.
To activate: press button Á .
#
Residual heat will be switched off automatically.
F167 0009 02
Climate control 255
Switching the residual heat in the rear on/off
Requirements:
The vehicle is parked.
R
When the residual heat of the engine is activated
in the rear compartment, you can heat or ventilate
the rear compartment for approximately
30 minutes.
Press button 5 .
#