Serial Tag & Location; Reading The Serial Tag - Traulsen G Series Service Manual

1.2 Serial Tag & Location:
The serial tag is a permanently affixed label on which is recorded vital electrical and refrigeration data about
your Traulsen product, as well as the model and serial number. This tag is in the upper left interior
compartment on all G-Series refrigerator and freezer models.

1.2.1 Reading the Serial Tag:

Model = The model # of your Traulsen unit
(S/N) Serial Number = The permanent ID# of your Traulsen unit
Refrigerant SYS1 = System 1 Refrigerant type used and refrigerant charge
Design Pressure = System 1 High and Low Pressure
Refrigerant SYS2 = System 2 Refrigerant type used and refrigerant charge
Design Pressure = System 2 High and Low Pressure
Volts = Voltage
Hz = Cycle
PH = Phase
Total Current = Maximum amp draw
Min Circuit Amps = Minimum circuit ampacity
Lights = Light wattage
Agency Labels = Designates agency listings
Components = Component Ratings
Note:
Design Pressure is the maximum pressure system components can handle and NOT the operating
pressure.
5