Traulsen G Series Service Manual page 28

3.4.2.4 Lock Keeper Adjustment:
Adjusting the Lock Keeper
Remove the (2) machine screws holding the strike plate to the mounting plate using a #2 Phillips
1.
screwdriver.
Remove the strike plate.
2.
Loosen the (2) machine screws holding the mounting plate to the cabinet.
3.
Adjust the mounting plate (left or right) Until:
4.
a. The lock keeper does not interfere with the door opening or closing.
b. The lock bolt extends far enough in the locked position to be stopped by the strike plate, locking
the door.
Figure 22 Lock keeper Adjustment
27