Power Module Led's & Reset Button Overview - Traulsen G Series Service Manual

4.14 Power module LED's & Reset Button Overview:
RESET
BUTTON
FANS LED
nd
2 STAGE
DOOR HEATER
LED
COMPRESSOR
LED
NOTE: To reboot the board, press the reset button (See above Figure) for 5 seconds or until all the LED lights
flash, shut off and then come back on again.
The reset button does not restore programming back to factory settings.
Figure 39: Power Module Led and reset button Overview.
DOOR LIGHTS
LED
DEFROST
LED
PROCESSOR
LED
(FLASHES)
POWER
INDICATOR LED
(ALWAYS ON)
USB LED
42