Replacing The Compressor - Traulsen G Series Service Manual

6.2.13 Replacing the Compressor:

If you have taken all the proper steps outlined above to troubleshoot the compressor, and therefore have
determined the compressor has failed, be sure to replace the liquid line filter drier along with the compressor
(Traulsen Part Number 325-60103-00). Traulsen recommends that you use a nitrogen flow regulator to purge
with low pressure nitrogen as you braze all connections. After you have brazed all connections and have checked
thoroughly for leaks, change the oil in your vacuum pump before connecting to system with a micron gauge.
Pull a deep vacuum of 200 microns to remove moisture from the system.
Figure 52: Filter Drier
54