Adjustments - Traulsen G Series Service Manual

Reach-in & pass thru refrigerator & freezer

Hide thumbs Also See for G Series:

Table of Contents

3.2

Adjustments

Performing a Door Adjustment:

These instructions are intended to aid the technician in the field perform hinge adjustments and may not

cover all situations that may arise. Final diagnosis of field-based equipment is the sole responsibility of the

technician performing any work required.

1. Remove the hinge safety screw.

2. Remove the door and gently lay it on the floor to slide hinge cover off the hinge bracket.

3. Loosen the (3) bolts securing the hinge bracket to the door.

4. Install door without hinge covers.

5. Position adjusting plate to desired fit and tighten the screws and replace hinge covers.

Figure 15 Door Adjustment inward.

Figure 16 Door Adjustment outward.

Table of Contents