Traulsen G32000 Specification Sheet

Project
Model Specified:
G-Series Hinged Glass Door Reach-In
Refrigerators/Self-Contained
Equipped with an
easy to use
microprocessor
control!
Model G32000
(shown with optional interior arrangements)
Standard Product Features
• High Quality Stainless Steel Exterior Front
• Corrosion Resistant Anodized Aluminum One-Piece Sides
• Durable Anodized Aluminum Interior
• Microprocessor Control With LED Temperature Readout
• Top-Mounted, Balanced, Self-Contained Refrigeration System
• Large High Humidity Evaporator Coil Outside The Food Zone
• Load-Sure Guard Protects Against Improper Loading
• Full or Half Length Hinged Glass Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Stainless Steel Vertical Door Handle(s)
• Incandescent Lights With Exterior Switch
• Damage Resistant Stainless Steel Breaker Caps
• Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
• Energy Saving Automatic Non-Electric Condensate Evaporator
• Magnetic Snap-In Door Gaskets
• Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached
• Set of Four (4) 6" High Casters With Locks
• One Year Parts And Labor Warranty
• Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Quantity
One, Two & Three Section Models, 32" Deep
Aside from their anodized aluminum side and interior finishes,
G
Traulsen's G-Series "Dealer's Choice" models meet or exceed the
standard specifications and performance of most other brands top
SERIES
tier product offerings. Reliable, energy efficient, and durable, with
Stainless Steel
large individual storage capacities, the high quality G-Series line-up
Front & Door(s)
includes a wide range of one, two and three section reach-in
refrigerator and freezer models, built in our most popular footprints.
They are available with either full or half height doors, and the added
convenience of a variety of different door hingings to choose from. In
addition, each also includes a number of user-friendly features,
making them one of the best overall equipment values in Foodservice
today, and the right fit for nearly any commercial application.
Single Section
(Formerly Model GHT132WUTHG)
Model # Door Hinging Model # Door
G11000 Half Right
G11001 Half Left
G11010 Full
G11011 Full
• Additional Epoxy Coated Shelves*
• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x
26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)
• Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.
• Chrome Plated Shelves* (for use in lieu of standard shelving)
• 6" High Adjustable Legs (for use in lieu of standard casters)
• Two Year Service/Labor Warranty Available
NOTE: All optional accessory kits are shipped separately for
Approval: __________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
AVAILABLE MODELS
Two Section
(Formerly Model GHT232NUTHG)
Hinging
G21000 Half Left-Right
G21001 Half Right-Left
Right G21002 Half Right-Right G32002
Left G21003 Half Left-Left
G21010 Full Left-Right
G21011 Full Right-Left
G21012 Full Right-Right G32012
G21013 Full Left-Left
Optional Accessory Kits
*Please refer to spec sheet 4-7 for
optional accessory kit details
later installation by others at the jobsite.
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
Three Section
(Formerly Model GHT332NUTHG)
Model # Door Hinging
G32000 Half Left-Right-Right
G32001 Half Left-Left-Right
Half Right-Right-Right
G32003 Half Left-Left-Left
G32010 Full Left-Right-Right
G32011 Full Left-Left-Right
Full Right-Right-Right
G32013 Full Left-Left-Left
SECTION
4-3