Engine Oil Specifications; Checking The Engine-Oil Level - Toro Greensmaster 1018 Operator's Manual

Engine Oil Specifications

Crankcase capacity:
Oil type:
Oil viscosity:

Checking the Engine-Oil Level

The ideal time to check the engine-oil level is when the engine is cool or before you have
started the engine for the day. If you have already ran the engine, allow the oil to drain back
down to the sump for at least 10 minutes before you check the engine-oil level.
1. Shut off the engine and wait for all moving parts to stop.
2. Position the machine so that the engine is level, and clean the area around the oil-fill
tube
3. Remove the dipstick
4. Remove the dipstick and wipe the end clean.
5. Insert the dipstick fully into the oil-fill tube, but do not thread it in.
6. Remove the dipstick and check the engine-oil level.
.
by rotating it counterclockwise.
0.56 L (19 fl oz)
API classification SJ or later.
Select the oil viscosity according to ambient temperature in
the table below.
Note:
Multi-grade oils (5W-30 and 10W-30) increase oil
consumption. Check the engine-oil level more frequently when
you use these oils.
G404892
G404893
6