Specifications; Attachments/Accessories - Toro Greensmaster 1018 Operator's Manual

Specifications

Note:
Specifications and design are subject to change without notice.
Width
Dry weight*
Width of cut
Height of cut
Engine speed
Mowing speed
Transport speed
*Traction unit only. Refer to the cutting unit Operator's Manual for the weight of each cutting unit.

Attachments/Accessories

A selection of Toro approved attachments and accessories is available for use with the
machine to enhance and expand its capabilities. Contact your Authorized Service Dealer or
authorized Toro distributor or go to
accessories.
To ensure optimum performance and continued safety certification of the machine, use only
genuine Toro replacement parts and accessories.
3460-879A
Model 04820
84 cm (33 inches)
95 kg (210 lb)
46 cm (18 inches)
Dependent on traction-drum position and use of High Height-of-Cut Kit.
Clip
Model 04830
91 cm (36 inches)
100 kg (220 lb)
53 cm (21 inches)
Dependent on reel speed and reel-drive-pulley position.
Low idle: 1,900 ± 100 rpm; High idle: 3,450 ± 100 rpm
3.2 km/h (2 mph) to 5.6 km/h (3.5 mph)
8.5 km/h (5.3 mph)
www.Toro.com for a list of all approved attachments and
Page 4–9
Model 04840
104 cm (41 inches)
107 kg (235 lb)
66 cm (26 inches)
Product Overview: Specifications