9.3
Error of Scan to USB
9.3
Error of Scan to USB
Message
[USB MEMORY FULL]
[USB Dev.Not support]
[USB Hub Not support]
[COMMUNICATION ERROR]
[USB Memory]
[DISCONNECT]
[USB Memory]
bizhub 215
Cause
The memory capacity of the USB
is less than the data size to be
scanned.
A non-USB memory stick or a
type of USB memory that cannot
be written to (a write-protected
one) is used.
USB hubs are not supported.
Communication with the USB
memory could not be estab-
lished.
The connection to the USB
memory has been interrupted.
Correction action
Either increase the amount of
available space by deleting files
on the USB memory,or use an-
other USB memory that has
more available memory space.
Use a writable USB memory
stick.
Remove the USB hub and insert
a USB memory stick.
Check that the USB memory is
connected correctly.
Check that the USB memory is
connected correctly.
9
9-5