How To Use Scan To Usb - Konica Minolta bizhub 215 Quick Manual

5.4

How to use Scan to USB

5.4 How to use Scan to USB
This chapter describes how to store scanned data on the USB memory.
1
Load the original.
% For details on how to load the original, refer to page 1-37.
2
When a USB memory device is connected to this machine, the machine mode changes to scan mode
and [TO: Scan to USB Memory] is displayed.
% The file format and compression coding method can be specified. For details, refer to Chapter 7 of
the [User's Guide Scan Operations].
3
Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
bizhub 215
5
5-11