York YCAV0157 Installation Operation & Maintenance page 273

SETUP MODE ◄ DEF XXXXX LO XXXXX HI XXXXX
COMP 1 STARTS
SETUP MODE ◄ DEF XXXXX LO XXXXX HI XXXXX
COMP 2 STARTS
SETUP MODE ◄ DEF XXXXX LO XXXXX HI XXXXX
COMP 3 STARTS
SETUP MODE ◄ DEF XXXXX LO XXXXX HI XXXXX
COMP 4 STARTS
The following setup display is selectable as YES or NO
◄ ►
using the and (ARROW) keys.
SETUP MODE CLEAR HISTORY BUFFERS?
◄ ► XXXXXXXXXXXXXXXXXXXXXXXX
The following (3) setup OPTION displays are select-
able as ENABLED or DISABLED using the
(ARROW) keys according to the options installed on
the chiller:
SETUP MODE REMOTE TEMP RESET OPTION
◄ ► XXXXXXXXXXXXXXXXXXXXXXXX
SETUP MODE REMOTE CURRENT LIMIT OPTION
◄ ► XXXXXXXXXXXXXXXXXXXXXXXX
SETUP MODE SOUND LIMIT OPTION
◄ ► XXXXXXXXXXXXXXXXXXXXXXXX
The following setup OPTION display is selectable as
ENABLED or DISABLED using the
ROW) keys:
SETUP MODE ◄ DEF XXXXX LO XXXXX HI XXXXX
REMOTE INPUTS SERVICE TIME
The following OPTION displays are selectable as EN-
ABLED or DISABLED using the
keys. The choices are:
· NONE (default)
· TEMP SENSOR 1
· TEMP SENSOR 2
· TEMP SENSOR 3
JOHNSON CONTROLS
UNIT SETUP MODE (CON'T)
= XXXXX
= XXXXX
= XXXXX
= XXXXX
◄ ►
and
◄ ►
and (AR-
= XX MIN
◄ and ► (ARROW)
SETUP MODE SYS 1 MOTOR SENSOR TO IGNORE
◄ ► XXXXXXXXXXXXXXXXXXXXXXXXX
SETUP MODE SYS 2 MOTOR SENSOR TO IGNORE
◄ ► XXXXXXXXXXXXXXXXXXXXXXXXX
SETUP MODE SYS 3 MOTOR SENSOR TO IGNORE
◄ ► XXXXXXXXXXXXXXXXXXXXXXXXX
SETUP MODE SYS 4 MOTOR SENSOR TO IGNORE
◄ ► XXXXXXXXXXXXXXXXXXXXXXXXX
If a motor temperature sensor fails, a single sensor may
be ignored by making a program change in the Unit
Setup Mode. The default setting is "NONE", indicating
all sensors are being monitored.
FORM 201.21-NM1 (1223)
8
273