Akai FX SYSTEM M630 Operator's Manual page 6

Fig. 1
TUNER /CD_10KEY
POWER Vv VOWUME A MUTE
ON/STANOBY
AKAI
WIRELESS REMOTE CONTROL UNIT
RC-S630
Remote control
The remote control can be used to conveniently operate the
stereo system from a distance. Some functions are only oper-
able with the remote control.
Controls
@ Transmitting window
@TUNER/CD 10KEY buttons
@® SOUND CHARACTER </> and MODE buttons
(Used for optional EA-M830 equalizer operation. Refer to
the equalizer's manual for details).
@TAPE I/II deck operation buttons
TAPE ! deck:
<J Reverse play button (for HX-M830W model only)
Play button
44 Rewind button
> Fast forward button
leiRecording pause button (for HX-M830W model only)
1 Stop button
TAPE II deck:
<] Reverse play button
Play button
<4 Rewind button
bP Fast forward button
tetRecording pause button
[] Stop button
TAPE I/II deck:
© Auto mute button
(Does not function for tape | deck on HX-M630W model.)
®CD player operation buttons
<4 Reverse search button
bP Forward search button
PROG (Program) button
CLEAR button
RANDOM button
SYN REC (Synchro record) button
REPEAT button
EDIT button
DISC NUMBER buttons
(Used for optional CD-M830M multi compact disc player
operation. Refer to multi compact disc player's manual for
details.)
P1 button
(Used for optional CD-M830M multi compact disc player
operation. Refer to multi compact disc player's manual for
details.)
k@<@ Skip reverse button
> / 10 Play/Pause button
Stop button
PI Skip forward button
@ INPUT buttons (TAPE, TUNER, CD, </>)
@ POWER ON/STANDBY button
MUTE button
@VOLUME \ / A button
Operation
Point the remote control at the tuner's REMOTE SENSOR win-
dow and press the desired operation button. If the remote con-
trol will only operate from a short distance or narrow angle, this
indicates that the batteries are weak and need to be replaced.
Operating the remote contro! near fluorescent lights may cause
malfunction.
How to load the batteries
Slide the battery compartment cover in the direction of the
arrow and remove it (Fig. 1).
Load the batteries according to the polarity guides on the
remote control unit.
3 Replace the battery compartment cover.
Cautionary notes
On the remote control
@ The remote control cannot be used for recording or playback
functions that require the combined pressing of two tape
transportation buttons (intro scan or auto play for example).
Please use the cassette deck's tape transportation buttons
for the operation of such functions.
@ Avoid dropping the remote control or getting it wet.
® Avoid exposing the remote control to direct sunlight or
strong light as this may cause malfunction.
@ Keep the remote control away from appliances that gener-
ate electrical noise (TV sets, micro-wave ovens, etc..)
@ When replacing the batteries, clean all the remote control
and battery terminals with a dry cloth.
On the batteries
@ When you do not plan to use the remote control for a long
period of time, remove the batteries.
@ Read the cautions printed on the batteries before inserting
them.
@ When replacing the batteries, replace them all at the same
time. Do not mix old batteries with new ones.
Intelligent operation
When the power is off, pressing the remote control's TAPE,
TUNER, or CD button will turn the power on and automati-
cally set the amplifier for input of the source selected (the
TAPE, TUNER or CD input source indicator will light).
Playback of the selected source or reception of a station
will start automaticaily.
When the TAPE button is pressed:
If a cassette is loaded in the deck, playback wil! begin auto-
matically.
If a cassette tape is not loaded, "PLEASE SET TAPE" will
appear on the tuner's frequency/message display.
When the TUNER button is pressed:
The station last tuned before the power was turned off will
be received.
When the CD button is pressed:
If a compact disc is loaded, playback will begin.
If a compact disc is not loaded, the disc drawer will open
automatically and "PLEASE SET DISC" will appear on the
tuner's frequency/message display. "ERROR" will appear
on the CD player's FL display.