Advertisement
Available languages
Available languages
Connections
Before proceeding
RIGHT SPEAKER
To prevent damage to the optical fiber cable, connect and
disconnect by holding the plug, not the cable.
Keep the inside of the optical terminal clean.
When connecting the flat cables or optical fiber cable, make
sure that they are firmly inserted into the terminal with the flat
side facing up.
The digital audio signal is acomposite signal made up of the
left and right channel signals. For this reason, separate left
and right INPUT and OUTPUT terminals are not necessary.
The short pins inserted
in the PROCESSOR
terminals
should only be removed for processor (graphic equalizer
etc.) connection.
Flat cable connection
Terminal
eae
"fe Flat side up
Release tab sa>
<@& Release tab
Flat cable
To remove:
While pressing on the release tabs, pull evenly on the flat
cable.
LEFT SPEAKER
EG
+
mp To household AC outlet
CD PLAYER
CASSETTE DECK
CD PLAYER
Advertisement
