Table of Contents
Advertisement
9
Control and Display Panel
To select the operating mode, press the "Mode"
key to select "Manu" for manual mode or "Auto"
for automatic mode.
"Manual mode": In this mode, the unit will
operate at the heat output selected using the "-"
key, ranging between 1 (minimum fire ) and 5
(maximum fire)
Auto mode: In this mode, the unit is turned on at
maximum power until reaching a temperature 1ºC
above the selected temperature (set point
temperature). After reaching the selected
temperature, the unit switches to the minimum
operating power. The set-point temperature can be
set between 5 and 40ºC by pressing the "-" key.
The "+" key allows the user to set the fan
speed between 1-5 or to "A" for automatic
operation.
Press "set" to see the following menu:
To set the year press "set". The display starts to
flash. Press the "+" or "-" key to select the desired
year and then "ok" to confirm.
Press "+" to scroll to the next menu. The "Month"
is displayed.
To set the "month" press "set". The display starts
to flash. Press the "+" or "-" key to select the
desired month and then "ok" to confirm.
Press "+" to scroll to the next menu. The "Day
number" is displayed. This is the date / day of the
month.
To set the "Date" press "set". The display starts to
flash. Press the "+" or "-" key to select the desired
date and then "ok" to confirm.
Repeat the same steps to set the Day of the Week
,Hour and minutes.
14
Advertisement
Table of Contents
