Stanley K50 Installation And Operating Instructions Manual page 6

Wood pellet stove
Table of Contents

Advertisement

Empty the ash container and clean the combustion chamber after burning of every 30kg of
pellets.
Check flueways before lighting especially after a shut down period.
Allow adequate air ventilation to ensure plenty of air for combustion at all times.
Never turn off an operating pellet stove unit by disconnecting the electric plug. Disconnecting the
plug will prevent the extraction of combustion fumes;
The only fuel that should be used for operation of the pellet stove are pellets certified by EN
14961-2 grade A1 with a diameter of 6 mm and a length that can range from 10 to 30 mm.
Keep all combustible materials a safe distance away from unit, please see section for clearances
to combustibles.
Never use aerosol spray near the appliance when it is in operation.
For safety reasons never leave children or the elderly unaccompanied while stove is in use. Use a
fire guard.
This appliance should be regularly maintained by a competent service engineer.
Please keep the packing materials away from children;
The manufacturer will not be responsible for any modifications made to this appliance by or on
behalf of the user. The manufacturer will not be responsible for any eventual damage or loss as a
result of unauthorised modifications. In the event that parts need to be replaced, only use parts
recommended by Waterford Stanley.
6

Advertisement

Table of Contents
loading

Table of Contents