*Tests performed using wood pellets with a heating capacity of 4.9 kWh/kg.
The above information was obtained during product homologation tests performed at
independent laboratories accredited for pellet stove tests.
6
Installation of the pellet stove
6.1
Installation of the pellet stove
Before starting the installation, perform the following actions:
Check immediately upon receipt that the delivered product is complete and in good condition. Any
9.
defects must be indicated before installing the appliance.
The base of the stove has four height-adjustable feet, allowing simple adjustment on uneven
10.
floors.
Before installing, please perform the following steps:
Upon receipt, check that the product is complete and determine that is does not show any sign of
•
damage . Any damage or defects should be advised to the retailer before the stove is installed.
The stove is equipped with four height adjustable feet at the base which allow for a simple adjustment
•
when installed on a uneven surface.
Figure 3
6.2
Installation requirements
Location, Suitable area to be heated.
•
Floor support / Hearth.
•
Flue connection capable of producing 12pa flue draught.
•
Electrical requirements.
•
Clearances
•
To combustibles
For servicing/ maintenance
9