Setting The Sleep Timer; Setting The Programmer - Stanley K50 Installation And Operating Instructions Manual

9.1

Setting the sleep Timer

This option is only displayed on the menu when
the stove is on. Press the " menu " button" until "
day and time " is displayed , then press the "ok "
button twice which will scroll to the right to show
the display as below.
Press "set". The display starts to flash. Select the
desired time using the "-" and "+" keys. After
choosing the time, press "ok" to confirm.
Press " esc" when finished to get back to the
normal display.
The display will then switch between the normal
screen and a screen similar to above showing the
current time and the sleep time at which the stove
will switch off.
9.2

Setting the Programmer.

The unit is equipped with a timer that allows the
unit to be turned on or off at specified times.
This can be set up by loading one of 10 preset
profiles in the software P01- P10.
Alternatively, the unit can be programmed
manually with up to 6 on/ off times per day
When the unit is set to switch on and off using the
programmer the display will flash between the on/
off screen and a screen similar to above.
To enable the timer press "set". The "enable"
menu is displayed.
The timer may only be activated after setting the
configurations, as shown in the following
paragraph.
To activate the Timer mode, press "Set" the
display starts to flash. Press the "+" or "-" key to
select "On" or "Off" and then "Ok" to confirm.
Press the "+" key to scroll to the "Load profile"
menu
There are 10 weekly programmes available on the
Timer see " fixed timer schedules at the back of
the manual . The selected programme runs from
Monday to Friday and from Saturday to Sunday.
Press "set"; the display starts to flash. Press the
"+" or "-" key to select the desired programme
and then press "ok" to confirm. Press the "+" key
to go to menu "Reset".
Press the "+" key to go to menu "Reset". This
menu allows you to delete any programme
settings. To do this, press "set". The "Confirm"
appears. Press "set" again to confirm that you
want to delete the settings or "esc" to exit.
15