Setting The Language For The First Time - Stanley K50 Installation And Operating Instructions Manual

15.3.1 Pellet reservoir lid ..................................................................................................................... 30
15.4 F
ILLING THE PELLET RESERVOIR
Thank you for purchasing a Waterford Stanley Wood pellet Stove.
Please read this manual carefully and retain it for future reference.
These products fulfil the requirements of the Construction Products Regulation and have been
approved with the CE conformity mark;
The Boiler pellet stoves are manufactured in compliance with the EN 14785:2008 Standards
WATERFORD STANLEY bears no responsibility for any damage to the stove if it is installed by non-
qualified personnel;
WATERFORD STANLEY is not responsible for any damage to stoves not installed and used in
compliance to the instructions included in this manual;
All local regulations, national and European standards, must be observed when installing, operating and
servicing the stove;
Whenever you need assistance, you should contact your stove's supplier or installer. You must have the
wood pellet stove serial number located on the identification plate.
The product must be commissioned by a Waterford Stanley approved service engineer.
1

Setting the Language for the first time.

To set the Language to English on the controller.
Press the menu button until " set" is displayed beside the menu button.
Press the " +" button 4 times , display shows "configura.......".
Press the set button twice until abbreviation for languages in the top and centre of the screen.
Press the " +" button until abbreviation "EN" is displayed.
Press the Menu button to set the language to English.
................................................................................................................. 30
3