Refill The Pellet Hopper; Maintenance; Daily Maintenance; Glass Cleaning - Stanley K50 Installation And Operating Instructions Manual

Wood pellet stove

Table of Contents

12 Refill the pellet hopper

Open the pellet hopper at the top of the

equipment by moving the tab at the top,

Figure 15Opening pellet hopper

pour the pellets from the bag into the hopper,

close the door

Figure 16 Filling with pellets

The pellet stove requires careful maintenance

(see the maintenance label on the pellet hopper

lid). The main care to be taken is the regular

cleaning of the ashes in the pellet burning area.

This can be done in a practical way with the aid

of a simple ash vacuum cleaner. The cleaning

operation must be carried out after each firing

of approximately 30kg of pellets.

Note: Before proceeding with any cleaning

operation it is imperative that the stove is turned

off and sufficiently cold to avoid accidents.

Figure 17 Maintenance label - pellet hopper door

See label with warnings and maintenance tasks

suggested cleaning schedules attached to the

pellet hopper door and also included in annex of

this manual.

The glass may only be cleaned when it is

completely cold; it must be cleaned with a

suitable product, respecting the instructions for

use and preventing the product from reaching

the sealing cord and the painted metal parts -

so as not to cause unwanted oxidation. The

sealing cord is glued and should therefore

not be wetted with water or cleaning products.

Figure 18 Incorrect , do not spray glass

Table of Contents