Table of Contents
Advertisement
The boiler pellet stove must be operated exclusively with pellets. No other fuel may be used.
Use only pellets certified by standard EN 14961-2 grade A1, with a
6 mm diameter and measuring between 10 and 30 mm long.
The pellets must not have a moisture content in excess of 8% . To guarantee a good combustion, the
pellets must maintain these characteristics so they should be stored in a dry place.
The use of different pellets will reduce the efficiency of the stove and cause poor combustion.
You should always use certified pellets and must test a sample before buying large bulk loads.
The physical/chemical properties of the pellets (i.e. the calibre, friction, density and chemical
composition) may vary within specific tolerances and according to each manufacturer. Please note that
this may cause alterations to the feeding process and, consequently, the need for different doses (more
or less pellets).
The stove allows the dose of pellets to be adjusted during start-up and at power levels by ± 25%
Warning : The stove must NOT be used as an incinerator
15 Appendices
To start operating the Boiler pellet stove, press the start/stop button for 3sec. The display should indicate
" Lighting " until the completion of this phase.
The pellets will pass through the supply channel to the burning basket (combustion chamber), where
29
Advertisement
Table of Contents
