Sony DCR-TRV6 Operating Instructions Manual page 84

Labeling a cassette
To erase a character
In step 6 turn the SEL/PUSH EXEC dial to select
I÷1,
t hen press the dial. The last
character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in the saIl-le vv'ay to make a new label.
If you set the write-protect tab of the tape to lock
You cannot label the tape. Slide the write protect tab to release the write protection.
If the _ mark appears in step 5
The cassette memory is f\fll. If you erase tile title iI1 the cassette, you can label it.
If you have superimposed titles in the cassette
When the label is displayed, up to fbur titles also appear.
When the "-----" indicator has fewer than 10 spaces
The cassette memory is frill.
The .... indicates tbe numl)er of cbaracters you can select fbr the label.
To enter a space
Select I Z& ? ! l, then select the blank part.
84