Sony DCR-TRV6 Operating Instructions Manual page 65

Dubbing only desired scenes - Digital program editing
Erasing all programs
(1) Select VIDE() EDIT in the menu settings. Turn the SEL/PUSH EXEC dial to
select ERASE ALL, then press the dial.
(2) Turn tile SEL/PUSH EXEC dial to select EXECUTE, then press tile dial.
All the program marks flash, then the settings are cancelled.
To cancel erasing all programs
Select RETURN in step 2, then press the dial.
To cancel a program you have set
Press MENU.
Tile program is stored in memory until the tape is ejected.
On a blank portion of the tape
You cannot set IN o1"Ol JT on a blank portion of the tape.
If there is a blank portion between IN and OUT on the tape
The total time code may not be displayed correctly.
Make sure your camcorder and VCR are connected, and that the VCR is set to recording
pause. When you use an i.LINK cable (DVconnecting cahle) the following procedure is
not necessary.
Wizen you use a digital video camera recorder, set its POWER switch to VCR.
(1) Select VIDEO EDIT. Turn the SEL/PUSH EXEC dial to select START, then
press tile dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
Search for the beginning of the first program, then start dubbing.
The program mark flashes.
The SEARCH indicator appears during search, and tile EDIT indicator appears
during edit on the LCD screen or in the viewfinder.
The PROGRAM indicator changes to light blue after dubbing is complete.
Wizen the dubbing ends, your camcorder and the VCR automatically stop.
To stop dubbing
Press • using the video operation huttons.
To end the program editing function
Your eanzeorder stops when the dubhing is complete. Then the display returns to
VIDEO EDIT in the menu settings.
Press MENU to end the program editing fimction.
You cannot record on the VCRwhen:
• The cassette is not inserted.
• The tape has run out.
•The write protect tah is set to expose the red mark.
• The IR SETUP code is not correct. (Wizen IR is selected.)
• The button to cancel recording pause is not correct. (When IR is selected.) (see page 59)
NOT READYappears on the LCDscreenwhen:
• The program to operate the digital program editing has not made.
• i.LINK is selected but an i.LINK cable (DV connecting cable) is not connected.
• The power of the connected VCR is not turned on. (when you set i.LINK).
65