Sony DCR-TRV6 Operating Instructions Manual page 36

Using the fader function
(1) When fading in [a]
In the standby mode, press FADER until tile desired fader indicator flashes.
When fading out [b]
In the recording inode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER --_ M.FADER* --_ BOUNCE* --_ MONOTONE --_ OVERLAP --_
WIPE --* DOT --* no indicator
The last selected finder mode is indicated first of all.
(2) Press START/STOP. The fader indicator stops flashing.
* DCR TRV6/TRVll only
_ _ FADER
FADER
To cancel the fader function
Afier the f_ade in/out is carried out : Your can-leorder automatically returns to the
nomlal mode.
Be%re the tilde in/out is carried out : Be%re pressing START/STOP, press FADER until
the indicator disappears.
Note
You callllO[ use tile following ft/nctions while using tile fader ftlnction. Also, you caollot
use the f_der f\mction while using tile following f\mctions:
Digital effect
Low lux mode of PROGRAM AE (Overlap, Wipe, or Random Dot flmction only)
Super NightShot
Tape Photo recording
When the OVERLAP, WIPE, or RANDOM DOT indicator appear in the standby mode
Your cameorder automatically stores the in-lage :eeorded on a tape. As the image is
being stored, tile indicators flash thst, and tile playback picture disappears. At this
stage, tile picture may :lot be recorded clearly, depending on the tape condition.
While using the bounce function, you cannot use the following functions (DCR-
TRV6/TRVll only):
Exposure
Focus
ZooIl'l
Pictm e effect
Note on the bounce function (DCR-TRV6/TRV11 only)
Tile BOUNCE indicator does :lot appear in tile following mode or f\mctions:
D ZOOM is activated in tile menu settings
16:9 wide
Picture eftect
PROGRAM AE
While inmemory mode (DCR-TRV1 IlTRV20 only)
36
You cannot use the riveter ftmction.