Sony DCR-TRV6 Operating Instructions Manual page 51

Searching a recording by date - Date search
Note
Ifone day's rerording is less than two minutes, your ramrorder may not arrorately find
tile point where the recording date changes.
In the _ mark
• Tile bar in the [_iiiiiiiiiiiiiiiiiiiiiiiii] mark indicates the present point on the tape.
• The l mark in the _ ) indicates the actual point you are trying to search.
If a tape has a blank portion between recorded portions
The date searrh f\mrtion may not work rorrertly.
Cassette memory
The tape cassette memory can hold six recording date data. If you search the date
among seven or more data, see "Searching for the date without using cassette memoly"
below.
i
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in _ to OFF in the menu settings (p. 85).
(3) Press SEARCH MODE on the Remote Commander
repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as fMlows:
DATE SEARCH ---+PHOTO SEARCH ---+PHOTO SCAN ---+no indicator
(4) Press _ on the Remote Commander to search for the previous date or press
on the Remote Commander to search fi_r the next date. Your camcorder
automatically starts playback at the point where the date changes. Each time
you press _ or I_pt, your camcorder searches for the previous or next date.
To stop searching
Press m.
8
©
0
_=
51