Sony DCR-TRV6 Operating Instructions Manual page 24

Checking the recording
- END SEARCH / EDITSEARCH /
Rec Review
You can use these huttons to check the recorded picture o1" shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
You can go to the end of the recorded section after you record.
Press END SEARCH in the standby mode.
The last five seconds of the recorded section are played hack and playback stops. You
can monitor tile sotmd fl'om the speaker ol headphones.
You can search for the next recording start point.
Hold down the +/ @ side of EDITSEARCH in the standl)y mode. The recorded section
is played hack.
+ : to go fbrward
@: to go backward
Release EDITSEARCH to stop playback. If you press START/STOP, re recording begins
ficomthe point you leleased EDITSEARCH. You cannot monitor the sotmd.
You can check the last recorded section.
Press the __,side of EDITSEARCH momentarily in the standby mode.
The last few seconds of the selected section are played back. You can monitor the sound
from the speaker or headphones.
End search function
When you use a tape without cassette memo W, the end search ftmction does not work
once you eject the cassette after you have recorded on the tape. If you use a tape with
cassette memory, the end search flmction works even once you eject the cassette.
If there is a blank portion in the recorded portion, the end search function may not work
correctly (p. 124).
24