Sony DCR-TRV6 Operating Instructions Manual page 55

Dubbing a tape
Connect using an S video cable (not supplied) to obtain high-quality pictures
With this conneeticm, you do not need to ecmnect tile yellow (video) plug of tile A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of" both your camcorder and
the VCR.
This connection produces higher quality DV fbrmat pictures.
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (not supplied) to _ DV IN/OUT
and to DV IN of the DV products. With digital to digital connection, video and audio
signals ale transmitted in digital form fur high quality editing. You cannot dub the
titles, display indicators or the contents of cassette memory.
Set the input selector on the VCR to tbe DV input position if the VCR is equipped witb
the input selector.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into your camcorder.
(2) Prepare the VCR Ibr recording.
Set the input selector to LINE. Refer to the operating instructions of the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
,--"'-:Signalflow
5'
DV IN/OUT
(not supplied)
When you have finished dubbing a tape
Press• on both your eameorderand the connected DV product.
You can connect one VCR only using the i.LINK cable (DV connecting cable)
The following functions do not work during digital editing:
Digital effect
PB ZOOM
Picture effect
If you record a playback pause picture with the _, DV IN/OUT jack
The recorded picture becomes rongb. And wben you play back tbe picture using tbe
other video equipment, the picture may jitter.
55