Sony DCR-TRV6 Operating Instructions Manual page 10

Step 1 Preparing the power supply
Install the battery pack to use your camcorder outdoors.
(1) Lift up tile viewfinder.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
(1) Lift up the viewfinder.
(2) Slide the battery pack out in the direction of the arrow while pressing BATT
down.
BATT release
lever
After installing the battery pack
Do not carry yore camcorder by holding the battery pack. If you do so, tile battery pack
may slide off youl camcorder tmintentionally, damaging your camcorder.
If you use the large capacity battery pack
If you install tile NP FM70/FMgO/FM91 battery pack on your camcorder, extend its
viewfinder. Take care not to pinch yotu finger when lifting the viewfinder up and down.
10