Sony DCR-TRV6 Operating Instructions Manual page 64

Dubbing only desired scenes - Digital program editing
(1) Insert the tape for playback into your camcorder, and insert a tape for
recording into the VCR.
(2) Press MENU
to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select _, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select VIDEO EDIT, then press the dial.
(5) Search for the beginning of the first scene you want to insert using the video
operation huttons, then pause playback (p. 27).
(6) Press MARK on the Remote Commander (DCR TRV11/TRV20 only), or the
SEL/PUSH EXEC dial.
The IN point of the first program is set, and the top part of the program mark
changes to light hlue.
(7) Search Ik_r the end of the first scene you want to insert using the video
operation huttons, then pause playback.
(8) Press MARK on the Remote Commander (DCR TRV11/TRV20 only), or the
SEL/PUSH EXEC dial.
The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(9) Repeat steps 5 to 8, then set PROGRAM.
When the program is set, the program mark changes to light blue.
You can set n_aximum of 20 programs.
_1 IN 0:3230/4
UNDO
ERASE ALL
TOTAL 0 00 00:00
SCENE 0
Bp_a Bp/,q£_H B_4/yP_f_4
IMENOi END ................
V_DEO EDIT 008:55O6
_/ OUT
ERASE ALL
START
TOTAL 0000000
SCENE 0
[MENU} END
Erasing the program you have set
Erase OUT fhst and then IN flora of"the last program.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
The last set program mark flashes, then the setting is cancelled.
To cancel erasing
64
Select RETURN in step 2, then press the dial.