Sony DCR-TRV6 Operating Instructions Manual page 125

Usable cassettes
Audio mode
12 bit mode: The original sound ran be rerorded in stereo 1, and tim new sound in
stereo 2 in 32 kHz. The balance between stereo 1 and stereo 2 can be adjusted by
selecting AUDIO MIX in the menu settings during playback. Both sounds can be played
back.
16 bit mode: A new sound cannot be recorded but the original sotmd can be recorded in
high quality. Moreover, it can also play back sotmd recorded in 32 kHz, 44.1 kHz or
48 kHz. When playing back a tape recorded in the 16 bit mode, 16BIT indicator appears
on the LCD screen or in the viewfinder.
When you play back a dual sotmd track tape recorded in a stereo system,
set "HiFi
SOUND" to the desired mode in the menu settings (p. 85).
Sound from speaker
HiFi SOUND Playing back Playing back a dual
mode a stereo tape sound track tape
Stereo Main sotmd and
STEREO
sub sound
1 Left sotmd Main sotmd
2 Right sound 87117 sound
You c_{nno{ record dual SOtlnd progranls oil your
c_lnlcorder.
iiii ii
When affixing a label on the mini DV cassette
Be sure to affix a label only on the lorations as illustrated below [a] so as not to cause
mall\ruction of your camcorder.
After using the mini DV cassette
Rewind the tape to tile beginning, put tile rassette in its rase, and store it in an upright
position.
When the cassette memory function does not work
Reinsert a rassette. The goM plated ronnertor of n7ini DV cassettes may be dirty or
dusty.
Cleaning gold-plated connector
If the gold plated ronnertor of n7ini DV rassettes is dirty or dusty, you may not operate
tile f\mction using cassette memo1T. Clean up the gold plated connector with cotton
wool swab, about eve1T 10 times ejection of a cassette. [b]
Do not affix a label
around tllis border. _
[b]
r.
o
[a] 12 5