Attaching to the Camera
When connecting the transmitter to the camera, always use one of the
interface cables included with the transmitter.
GPS
WFT
Turn off both the transmitter and
1
camera.
Attach the transmitter's
2
<a> port cap.
Attach the cap for preventing cable
disconnection.
Connect the transmitter and
3
camera.
CAMERA
For the interface cable, use either
IFC-40AB II or IFC-150AB II.
Attach the cable protector to the
camera and run the cable through the
clamp.
For cable protector instructions, refer
to the camera instruction manual.
Turn on both the transmitter and
4
camera.
The transmitter's <3> lamp will
light and <D> will be displayed on
the transmitter's LCD panel.
15