Positioning The Cameras - Canon WFT-E7 Instruction Manual

Positioning the Cameras

Reciever camera
Reciever camera
Set the Live View shooting/Movie shooting switch to <A>.

Position the reciever cameras in clear view of the sender camera,

without objects between them.
Reciever cameras can be positioned up to approx. 100 m / 328 ft.

from the sender camera. However, the distance supported for linked
shooting may be shorter depending on the wireless communication
conditions, which are affected by how the cameras are positioned,
the environment of use, and weather conditions.
Pressing the shutter button halfway on the sender camera will also

put the reciever cameras in the state corresponding to when their
shutter buttons are pressed halfway. Similarly, fully pressing the
shutter button on the sender camera will also put the reciever
cameras in the state corresponding to when their shutter buttons are
fully pressed.
There will be a slight delay after the sender camera shutter is

released before the reciever camera shutters are released.
(Simultaneous shooting is not possible.)
76
Sender camera
Reciever camera
Reciever camera