Attaching To The Camera - Canon WFT-E1 Instruction Manual

Attaching to the Camera

The WFT-E1 has an IEEE 1394 port and USB port for connecting to the camera.
To connect the camera and the WFT-E1, always use the interface cable that comes with
the WFT-E1. If the Digital terminal of the camera is IEEE 1394, always use the IEEE
1394 terminal. And if the Digital terminal is USB, set the [Communication] setting
menu to [Normal], [PC connect], or [LAN (WFT-E1)]. Images cannot be transferred if
the setting is not as above.
Protective Caps for Cable
To use the cable caps with an EOS-1D-series camera, first attach the respective cap to
the camera and WFT-E1/E1A. Then attach the cable plug to the <a> terminal.
For the WFT-E1/E1A
Top
Bottom
Before disconnecting the cable, turn off both the WFT-E1 and camera.
If the WFT-E1's <3> lamp blinks, it means that the WFT-E1 and camera are not properly
connected. Check the connection.
26
1
Turn off the WFT-E1 and camera.
2
Connect the WFT-E1 and camera.
¡
Connect the cable plug to the WFT-E1 and
camera's <a> port.
¡
Use the 15 cm/0.5 ft cable (water- and dust-
resistant) that came with the WFT-E1 when the
WFT-E1 is attatched to the camera's tripod
socket.
3
Turn on the WFT-E1 and camera.
a
The WFT-E1's <3> lamp will light and
<D> will be displayed on the WFT-E1's LCD
panel.
Attach this way
For EOS-1D series cameras
Top
Attach this way
Bottom