Canon WFT-E7 Instruction Manual page 119

61: Selected SSID wireless LAN network not found
Are any obstacles blocking the line of sight between the

transmitter and the antenna of the access point?
Move the antenna of the access point to a position clearly visible

from the point of view of the transmitter.
What to check on the transmitter
Does the SSID set on the transmitter match that of the access

point?
Check the SSID at the access point, then set the same SSID on

the transmitter (p.27).
What to check at the access point
Is the access point turned on?

 Turn on the power of the access point.
If filtering by MAC address is active, is the MAC address of the

transmitter used registered at the access point?
Register the MAC address (p.105) of the transmitter used at the

access point.
62: No response from wireless LAN terminal
What to check on the transmitter
Is the transmitter configured for communication in

infrastructure mode?
Configure the transmitter for communication in ad hoc mode.

What to check at the access point
Is there a nearby access point for ad hoc communication?

Set up an access point for ad hoc communication near the

transmitter.
Responding to Error Messages
119