Table of Contents
Advertisement
71: Cannot connect to reciever camera
Are you following the correct procedure to establish the
connection with reciever cameras?
Operate reciever cameras by following the correct instructions
(p.72, 73).
Are the reciever cameras too far from the sender camera?
Bring the reciever cameras closer to the sender camera.
72: Cannot connect to sender camera
Are you following the correct procedure to establish the
connection with sender camera?
Operate the sender camera by following the correct instructions
(p.74, 75).
Is the sender camera too far from the reciever cameras?
Bring the sender camera closer to the reciever cameras.
73: Could not synchronize the time
Are you following the correct procedure to establish a
connection between the sender and reciever cameras?
Operate the sender and reciever cameras by following the correct
instructions (p.87-89).
Is the sender camera too far from the reciever cameras?
Bring the sender and reciever cameras closer together.
81: Wired LAN connection lost
Is the LAN cable securely connected?
Reconnect the LAN cable between the transmitter and server.
Because the cable may be severed, try using another cable to
connect the devices.
Is the hub or router on?
Turn on the hub or router.
Is the server on?
Turn the server on. The server may have been turned off because
of an energy-saving mode.
Responding to Error Messages
123
Advertisement
Table of Contents
