Table of Contents
Advertisement
Auto Retry if Transfer Fails
error.
Once the cause of the error is eliminated, the images whose transfer
previously failed will be re-transferred automatically. With this option
activated, transfer is attempted again automatically after failure,
whether automatic transfer is used or captured images are transferred
via FTP. Note that when you cancel image transfer or turn off the
transmitter or camera, the image will not be re-transferred
automatically. See page 44 and transfer the image.
By setting the power saving function on the [Function settings] screen
(p.104), you can log off the transmitter from the FTP server after transfer
and stop the LAN connection.
If transfer fails, the <LAN> lamp on the
transmitter blinks in red. In this case, press
the <M> button, select [Communication
settings] under the [54] tab, and press
<0>. When the screen shown on the left is
displayed, check the error code number and
see page 108 to eliminate the cause of the
Transferring Images Individually
43
Advertisement
Table of Contents
