Canon WFT-E7 Instruction Manual page 74

Basic Linked Shooting
Preparing the Sender Camera
Set up the sender camera by operating the camera to use as the
sender.
Connecting the Cameras
Operate the reciever cameras and sender camera to connect them.
74
Select [Sender].
7
Perform steps 1 to 5 on page 72 for

the sender camera, then select
[Sender].
Select [OK] and press <0> to go to

the next screen.
Select [Auto connect].
8
Select [OK] and press <0> to go to

the next screen.
To set manually, see page 79.

On the reciever cameras, select
9
[OK].
On all reciever cameras, select [OK].

 On the sender camera's LCD monitor,
the number of reciever cameras
detected is displayed.
On the sender camera, select
10
[OK].
Check the number of reciever

cameras, then select [OK].