Canon WFT-E7 Instruction Manual page 105

[WFT server settings]
[Power saving]
FTP Transfer

When [Enable] is set, if no image is transferred for a certain period
of time, the transmitter will log off from the FTP server and stop the
LAN. When the transmitter is ready for image transfer, the
connection is re-established automatically.
EOS Utility/WFT server

If no communication is established for a certain period of time, the
transmission rate drops to save power. The power saving function is
enabled regardless of the setting.
Linked Shooting

The power saving function is disabled regardless of the setting.
[MAC address]
The MAC address of the transmitter can be checked.
Configure WFT Server settings. You can
set the WFT account and port number.
For instructions on setting the WFT

account, see page 56.
Note that there is normally no need to

change the port number (80).
Function Settings Screen
105