Canon WFT-E7 Instruction Manual page 83

Connecting the Cameras and the Computer
To connect the cameras and the computer, use the computer's wireless
LAN device search function.
For information about the wireless LAN device search function, refer

to the computer instruction manual.
Wireless LAN functions and operating system of the computer

must support ad hoc mode.
Set up a WFT account on the [Function settings] screen (p.104) in

advance.
Using the Transmitter with WFT Server
From the computer, find cameras
1
on the network.
Use the computer's wireless LAN

device search function.
Connect to a camera.
2
Select a device with the same ID as

the SSID you wrote down in step 6 on
page 82.
In the password field, enter the

encryption key set in step 6 on page 80.
The computer is now connected to

the camera.
Display WFT Server.
3
For the operation procedure, see

page 58.
In the address field, enter the IP

address you wrote down in step 6 on
page 59.
To connect to a different camera,

change the IP address in the address
field.
Log in by entering the WFT account,

[Login name] (user name) and
[Password] specified, in advance.
83