Canon WFT-E7 Instruction Manual page 29

Virtual Keyboard Operation
Entering text

In the bottom area, use <5> or <9> to select a character, then
press <0> to enter it.
You can check how many characters you have entered and how
many more can be entered by referring to [*/*] on the upper right of
the screen.
Changing the entry mode*

Select [
time you press <0>, the entry mode will change as follows: Lower
case 9 Numerals / Symbols 1 9 Numerals / Symbols 2 9 Upper
case.
* When [Touch control: Disable] is set, you can enter all characters on one
screen.
Deleting a character

Press the <L> button to delete one character.
Finishing the text entry

Press the <M> button to confirm what you have entered and exit.
If a confirmation dialog is displayed, select [OK] to exit.
Canceling the text entry

Press the <B> button to cancel text entry and exit. If a
confirmation dialog is displayed, select [OK] to exit.


] at the bottom right of the bottom entry area. Each
Connecting to a Detected Network Manually
Changing the entry area
Press the <Q> button to toggle
between the top and bottom entry
areas.
Moving the cursor
Use <5> or <9> in the top area to
move the cursor.
29