Canon WFT-E7 Instruction Manual page 88

Synchronizing the Time
88
Select the LAN type.
5
Select [OK] and press <0> to go to

the next screen.
Set up the sender camera.
6
Select [Sender], then press <0>.

Select [OK] and press <0> to go to

the next screen.
When the next screen is displayed,

the sender camera is ready. Go to
step 7 to set up the reciever cameras.
Set up the reciever cameras.
7
After configuring the reciever camera

settings following steps 1 to 5 on the
preceding page, select [Reciever].
Select [OK] and press <0> to go to

the next screen.
Select [OK] on the displayed screen.

To set the time on multiple reciever

cameras, follow these steps on all
reciever cameras.
On the sender camera's LCD monitor,

the number of reciever cameras
detected is displayed.