Canon WFT-E7 Instruction Manual page 79

Connecting the Sender and Reciever Cameras
Using the Transmitter with WFT Server
Set up the reciever cameras.
1
Perform steps 1 to 6 on page 72 for

the cameras to use as recievers.
When the next screen is displayed,
the reciever cameras are ready.
Set up the sender camera.
2
Perform steps 1 to 5 on page 72 for

the camera to use as the sender, then
select [Sender].
Select [OK] and press <0> to go to

the next screen.
Select [Manual connect].
3
Select [OK] and press <0> to go to

the next screen.
Select connection method.
4
Select the wireless LAN ad hoc mode

supported by the computer.
Select [OK] and press <0> to go to

the next screen.
Specify the channel.
5
When selecting [Manual setting],

specify the same channel on the
sender camera, reciever cameras,
and computer.
Select [OK] and press <0> to go to

the next screen.
79