Signal Menu; Import Update (Service Only) - Eizo CuratOR LX550W Instructions For Use Manual

7.3.5 Signal menu

Display (Example)
Input Width
DVI 2 or 1920
DP 2
DVI 1 or 1920
DP 1
DVI 3
DVI 4

7.4 Import update (service only)

Updates are imported by service personnel from a USB stick with released update software.
NOTICE
Update requirements
• The power supply to the monitor must not be interrupted during the update. An inter-
rupted update can result in monitor failure.
• During the update, multiple reboots of the monitor may occur. Do not switch off the
monitor until the update has been completed. A message is displayed on the monitor as
soon as the update is complete.
• Only use updates released by the manufacturer to ensure proper function of the moni-
tor.
• The OSD menu must be closed.
To update the firmware, proceed as follows:
1. Connect the USB stick to the type A USB port on the base of the device.
2. The update software is checked.
If the update software is valid, a start window is displayed.
3. Start the update.
4. If the message "Pull Stick to finish Updates" is displayed, remove the USB stick from the
USB port.
CuratOR LX550W
Instructions for Use, 04/2021
Description
Height Selecting this menu displays information regarding the video signals
at the selected inputs.
2160
The selected inputs are established in the "Other Options" -> "Ser-
vice" -> "System Mode" menu or in the "Display" -> "Input Selec-
2160
tion" menu.
Note: The inputs currently selected by the monitor are shown in in-
no sync
verse color display.
no sync
7.4 Import update (service only)
Operation
35