Adding An Expansion Card - Gateway E-1000 Series Maintaining And Troubleshooting

Hide thumbs Also See for E-1000 Series:
Table of Contents

Advertisement

Adding an Expansion Card

Your system is capable of accepting two expansion cards to enable features
not integrated into the system board. These features might include an
internal fax/modem, a SCSI controller card, or a video capture board.
Expansion cards are installed in a riser or extender card on the system board
(shown below without the case, for clarity).
The E-1000 Series riser card can accomodate either two PCI cards
(one in the upper slot and one in the lower, shared slot) or one PCI
card and one ISA card (PCI card in the upper slot and ISA card in
the lower, shared slot)
The E-100N Series riser card can accomodate two PCI cards.
Shared PCI/ISA card slot
PCI card slots
PCI card slot
E-1000 Series riser card
E-1000N Series riser card
Components 27

Advertisement

Table of Contents
loading

Table of Contents